POWER RACK WITH DIP BAR AND HIGH LOW PULLEY

Power Rack With Dip Bar and High Low Pulley (RATING CERTIFIED)

Code: PR1002+PR1002_L

Normally $995.00 $845.00

Introducing the latest release power rack to join our proven and tested current range. This rack is packed with features and can hold a tonne, literally. Get one for your home or studio to be able to perform a complete range of barbell and bodyweight exercises safely and securely. Band pegs, dip bars and multi grip pull up bar are bonus inclusions with this rack. The deep rear crossbeam design allows for easy unracking from the rear posts and all important bench access.

_x000D_

This rack also includes the optional High/Low pulley attachment which transforms it into a complete workout station. The High/Low pulley attachment includes all the optional extras you will need to get working right away.

_x000D_

We recently load tested this rack with in excess of 1200kg and pulleys over 200kg, and it was a positive result. Check out the specifications below for more information.

The purchaser of this gym equipment uses the equipment entirely at their own risk. It is the responsibility of the user of the gym equipment to exercise reasonable skill and care at all times.

_x000D_

Click on the following link to view our ALS Laboratory Group report for the results of the static testing of this product. These tests illustrate how the load rating hereby disclosed has been measured.

_x000D_

CLICK HERE TO VIEW TEST REPORT

800kg J Hooks & Safety bars / 130kg pulley rating - CLICK HERE TO VIEW TEST REPORT
Rack dimensions are - 1240mm wide x 1970mm deep x 2160mm high allow up to 200mm extra depth if using large plates on the pulley attachment.
The rack colour is a 2 tone combination powder coated in Black and Silver. (Blue colour is no longer available)
Net weight of the complete rack with all components is 116.2kg.
Posts are - 60mm x 60mm x 2mm 1220mm outside measurement with close hole adjustments of 35mm increments.
Full length safety bars are 50mm x 50mm and feature a rubber protective strip for barbell protection.
4 x J-Hooks are included which can be used on the front or rear of any post.
Full width dual depth multiple grip pull up bar is included can be inverted to reduce height.
A set of thick Ø50mm tapered dip bars are included.
8 x band pegs are included can be used in various positions at the top and bottom rails or use them for plate storage down low at the back of the rear posts.
The cable pulley attachment takes standard plates and includes a pair of steel adaptors for Olympic plates.
A lat pulldown bar 1080mm long and short bar 470mm long are included.
An extra knee hold down bar is also included to assist when doing heavy pulldowns from the top pulley.
Rack features rubber feet for traction.
This rack with High/Low pulley attachment is supplied in 3 cardboard boxes:

2050mm x 330mm x 150mm - Gross weight 47kg.
1250mm x 420mm x 240mm - Gross weight 48kg.
2070mm x 400mm x 170mm - Gross weight 27kg.

Free shipping for all orders over $100
Free returns
Secure payment

Introducing the latest release power rack to join our proven and tested current range. This rack is packed with features and can hold a tonne, literally. Get one for your home or studio to be able to perform a complete range of barbell and bodyweight exercises safely and securely. Band pegs, dip bars and multi grip pull up bar are bonus inclusions with this rack. The deep rear crossbeam design allows for easy unracking from the rear posts and all important bench access.

_x000D_

This rack also includes the optional High/Low pulley attachment which transforms it into a complete workout station. The High/Low pulley attachment includes all the optional extras you will need to get working right away.

_x000D_

We recently load tested this rack with in excess of 1200kg and pulleys over 200kg, and it was a positive result. Check out the specifications below for more information.

The purchaser of this gym equipment uses the equipment entirely at their own risk. It is the responsibility of the user of the gym equipment to exercise reasonable skill and care at all times.

_x000D_

Click on the following link to view our ALS Laboratory Group report for the results of the static testing of this product. These tests illustrate how the load rating hereby disclosed has been measured.

_x000D_

CLICK HERE TO VIEW TEST REPORT

800kg J Hooks & Safety bars / 130kg pulley rating - CLICK HERE TO VIEW TEST REPORT
Rack dimensions are - 1240mm wide x 1970mm deep x 2160mm high allow up to 200mm extra depth if using large plates on the pulley attachment.
The rack colour is a 2 tone combination powder coated in Black and Silver. (Blue colour is no longer available)
Net weight of the complete rack with all components is 116.2kg.
Posts are - 60mm x 60mm x 2mm 1220mm outside measurement with close hole adjustments of 35mm increments.
Full length safety bars are 50mm x 50mm and feature a rubber protective strip for barbell protection.
4 x J-Hooks are included which can be used on the front or rear of any post.
Full width dual depth multiple grip pull up bar is included can be inverted to reduce height.
A set of thick Ø50mm tapered dip bars are included.
8 x band pegs are included can be used in various positions at the top and bottom rails or use them for plate storage down low at the back of the rear posts.
The cable pulley attachment takes standard plates and includes a pair of steel adaptors for Olympic plates.
A lat pulldown bar 1080mm long and short bar 470mm long are included.
An extra knee hold down bar is also included to assist when doing heavy pulldowns from the top pulley.
Rack features rubber feet for traction.
This rack with High/Low pulley attachment is supplied in 3 cardboard boxes:

2050mm x 330mm x 150mm - Gross weight 47kg.
1250mm x 420mm x 240mm - Gross weight 48kg.
2070mm x 400mm x 170mm - Gross weight 27kg.

Specifications

800kg J Hooks & Safety bars / 130kg pulley rating - CLICK HERE TO VIEW TEST REPORT
Rack dimensions are - 1240mm wide x 1970mm deep x 2160mm high allow up to 200mm extra depth if using large plates on the pulley attachment.
The rack colour is a 2 tone combination powder coated in Black and Silver. (Blue colour is no longer available)
Net weight of the complete rack with all components is 116.2kg.
Posts are - 60mm x 60mm x 2mm 1220mm outside measurement with close hole adjustments of 35mm increments.
Full length safety bars are 50mm x 50mm and feature a rubber protective strip for barbell protection.
4 x J-Hooks are included which can be used on the front or rear of any post.
Full width dual depth multiple grip pull up bar is included can be inverted to reduce height.
A set of thick Ø50mm tapered dip bars are included.
8 x band pegs are included can be used in various positions at the top and bottom rails or use them for plate storage down low at the back of the rear posts.
The cable pulley attachment takes standard plates and includes a pair of steel adaptors for Olympic plates.
A lat pulldown bar 1080mm long and short bar 470mm long are included.
An extra knee hold down bar is also included to assist when doing heavy pulldowns from the top pulley.
Rack features rubber feet for traction.
This rack with High/Low pulley attachment is supplied in 3 cardboard boxes:

2050mm x 330mm x 150mm - Gross weight 47kg.
1250mm x 420mm x 240mm - Gross weight 48kg.
2070mm x 400mm x 170mm - Gross weight 27kg.